How To Control Rgb On MSI Motherboard

Are you looking to take your PC build to the next level? Adding colour, fun, and personalization is a great way to make your setup stand out. With MSI motherboards, it is possible to do just that– control RGB settings for a truly unique look!

But how can you go about perfecting this vibrant gaming setup? This blog post will provide an easy-to-follow guide on how to control the RGB lighting on an MSI motherboard so that you can achieve the ultimate customer experience!

How To Control Rgb On Msi Motherboard?

If you’re keen to start customizing the RGB lights on your MSI motherboard, there are three main steps that need to be taken.

Firstly, connect the RGB controller to the motherboard.

Next up, install the relevant software and enable it in order for the RGB controller to be operational.

Finally, get ready to shine – turn on those RGB lights and revel in their brilliance as you now have control over them through the controller!

how to control rgb on msi motherboard

How To Use Icue To Control Msi Motherboard Rgb?

The RGB lighting is a staple feature of modern motherboards, bringing vibrant colour to your gaming PC. But not all motherboards have RGB LEDs, so you will need an iCUE application to take advantage of this customisable illumination.

With it installed and active, the motherboard’s LED lights will light up upon power-up and you can manually control their settings with ease – creating a personalised look that stands out from the crowd.

Step 1: Navigate to the MSI BIOS.

Step 2: Navigate to the LED control tab.

Step 3: Determine the total number of RGB LEDs.

Step 4: Multiply the number of RGB LEDs by the number of colours.

If you are lucky enough to have an RGB LED display with the iCUE application, you can take advantage of its features and unleash its potential.

First of all, simply switch on your display. If you need to access the basic input output system (BIOS) utility, use the F8 key; while if it is the general menu that you wish to explore press F2.

To enter the iCUE setup utility within seconds, hit up F3 and for any advanced settings just make use of R as soon as possible.

How Do You Turn Off The Rgb Lighting On Your Motherboard?

Unwanted RGB lighting can be easily switched off with a few simple steps. To begin, consult your motherboard manual to find the setting for ‘RGB controls’. After you have located this section, simply switch it off and the LED lights will no longer operate.

It is important to take a look at the jumper or label provided on your motherboard as some motherboards may require additional settings in order to fully disable the LED controllers. Alternatively, you will

  1. Boot up your motherboard and enter the BIOS.
  2. Locate the Advanced Graphics or Graphics Options area.
  3. Turn off the RGB lights in this part.

How To Control Rgb Lights Without Installing An Msi Centre?

If you’re searching for a way to gain control of the RGB lights on your motherboard, then look no further. Downloading and installing MSI Afterburner is an effective solution that won’t cost you a dime. It’s easy to use: simply access its settings and customize the colours or hues of your liking.

If you’re looking to customize your gaming experience, the first step is downloading and installing MSI Afterburner. Once up and running, navigate to the RGB tab and select a colour of your choice by clicking on ‘RGB’. To apply this new setting, hit both the “Apply” and “Save” buttons.

Finally, click on Settings then Save Settings – et voilà! Your desired colour should now have been activated.

Why Are Msi Mystic Lights Not Working?

It is possible that your MSI Mystic Light is not functioning due to a number of different issues. Firstly, check that the light has been properly connected to the motherboard and that power is active.

Secondly, verify if there are any fault indications by looking for a yellow warning light on your motherboard – if it is illuminated, this implies there may be an issue with the hardware. However, if no such light can be found then it could signify that the motherboard itself is defective and might need replacing.

More Helpful Resources

How Long Does A Motherboard Last


How Do I Change The Led Colour On My Msi?

If you’d like to alter the colours of your LED, start by selecting a colour from either the inner or outer arc. Instantaneously, this will change the colour of your LED, allowing for quick and easy adjustment. If you want to personalise these colours further, click one of the slots on the outer arc – this stores whatever hue you’ve chosen in that location. To finalise your desired effect, utilise the Hue Circle and select whichever hue appeals to you most; what appears in the centre circle is an exact reflection of your pick!

How Do I Control My Msi Rgb Gpu?

The colour of the LED may be changed by clicking a colour on either the outer or the inner arcs. You can modify the colours that have been selected by clicking on one of the coloured spaces located on the outer arc. This will store your selection. After that, you may choose a colour by utilizing the Hue Circle.

What Rgb Software Does Msi Use?

When it comes to RGB lighting, MSI utilizes Mystic Light Sync for their products. This intuitive software was designed specifically with MSI in mind, allowing users to fully customize their RGB settings from the comfort of their own homes.
With Mystic Light Sync, you can control your lighting effects across multiple devices in order to create intricate visual displays tailored exactly to your tastes. Whether you prefer subtle highlighting or full-on light show effects, Mystic Light Sync has something for everyone. Plus, its easy integration with other synchronization platforms such as Razer Chroma and Corsair issue makes it even more appealing!


For those looking to control the colour of their RGB LED strips, the majority of motherboards require an additional software or hardware component. Compatible boards such as MSI have solutions available for this purpose that allow users to alter the hue and intensity of their lights in whatever manner they desire.

For those who aren’t able to find a compatible motherboard right away, there is another option: purchasing a dedicated RGB controller which can be used with many types of motherboards. These devices are relatively inexpensive and come with instructions on how to set up and adjust settings within them, allowing you to customize your lighting setup quickly and easily.

Beyond just controlling colours, some controllers may also give you additional features such as synchronizing several light strips together while others offer remote access functions so that you can control your lighting from afar or through voice commands. In any case, having access to these tools allows for much greater creativity when it comes time to decorate your builds with LEDs!

Leave a Comment